beautypg.com

Figure 2-23. setup pump server dialog box – Gasboy FuelOmat system 8 Popt Commverter User Manual

Page 48

background image

3. Set up a bus for use by Gilbarco Legacy & Gasboy 8800 pumps. Note: port number may

differ.

4. Save the newly added Bus by clicking on the New button
5. Select the P. Servers tab. The Setup Pump Server dialog box appears (see Figure 2-23)
6. Set up a Pump Server for use by Gilbarco Legacy & Gasboy 8800 pumps. Note: port

number may differ

7. Save the newly added Pump Server by clicking on the New button

Figure 2-23. Setup Pump Server Dialog Box

8. After adding the Pump server, highlight the Pump Server and Click on the Addtl. Features

button. The Pump Server Settings dialog box appears (see Figure 2-24)

8 Port CommVerter Operation and Installation Manual

44

See also other documents in the category Gasboy Hardware: