Gasboy FuelOmat system 8 Popt Commverter - Manual (Page 59)

2.9.4. Pump Server Setup
The ini file contains definitions used to communicate with the relays.
Example for one pump is given below:
[cluster_01]
commtype=tcp
ip=192.168.1.108
port=3001
enable_echo=N
log_cluster_port=10001
[pump_01]
clusterid=1
addr=1
num_of_nozzles=1
specific=specific_01
[specific_01]
taiwan_soft_ver=N
use_relay=Y
relay_port=6500
relay_ip=192.168.1.108
relay_con_timeout=200
channel=1
New definitions are
 relay_port – this is the Digital I/O port for relay's comm
 relay_ip - The comverter IP where the relays are placed.
 channel - The relay channel which will be activated ( it could be from 1 to 8 ) .
8 Port CommVerter Operation and Installation Manual 55