Gasboy FuelOmat system 8 Popt Commverter - Manual (Page 49)

Figure 2-24. Pump Server Settings Dialog Box
9. Add a cluster for use by Gilbarco Legacy & Gasboy 8800 pumps. Be sure to select the
Enable Echo checkbox when adding the cluster
10. Save any changes that were made
11. On the Setup screen, click Save and then Reload. After the reload has been successfully
completed, the Gilbarco Legacy & Gasboy 8800 pumps may be added
12. Click on the Add Pump button on the Setup screen. The Setup Pump Settings dialog box
appears (see Figure 2-25)
8 Port CommVerter Operation and Installation Manual 45