Gasboy CFN Series SCII Start-Up Manual - Manual (Page 68)

CFN Series System
8-8 03/07/03
Communications Setup
Main Baud 9600 Aux Baud 9600
Main Data/Parity 8/None Aux Data/Parity 8/None
Main Stop Bits 1 Aux Stop Bits 1
Main Rcv Hndsk XON/XOFF Aux Rcv Hndsk NONE
Main Xmt Hndsk NONE Aux Xmt Hndsk XON/XOFF
Main Rcv Level 50% Aux Rcv Level 50%
Ignore 8th Bit Off Aux Port RS232
Comm Mode Full Duplex Aux Interface RS232
Disconnect 2 Sec Printer Serial
4. Press F3 or PAGE DOWN to display the next Setup Screen, Display Setup.
Display Setup
Columns 132 Background Dark
80/132 Clear On Attributes Char
Lines 24 Wprt Intensity Dim
Pages 1X Lines Wprt Reverse Off
Status Line Ext Wprt Underline Off
Cursor Style Blink Block Refresh Rate 60Hz
Cursor On Pound Char US
Screen Saver 15 Min Auto Font Load On
NOTE: The Columns setting of 132 may be changed to 80 if desired; however, this may cause
transactions displayed on the screen (and on the Okidata printer) to wrap, hindering
readability.
5. Press F4 or PAGE DOWN to display the next Setup Screen, Keyboard Setup.
Keyboard Setup
Key Click Off Break 250 ms
Key Repeat On Xmt Limit None
Key Lock Caps FKey Xmt Limit None
Return Key CR Key Code ASCII
Enter Key CR WP Keyboard Mode Off
Back Space Key BS/DEL Lock Keyboard Disable
Left Alt Key Funct Language US
Delete Key Normal