Gasboy CFN Series SCII Start-Up Manual User Manual
Page 66
CFN Series System
8-6
03/07/03
Setup CONFIG.POS File
When you set up the CONFIG.POS file, you specify the special network cards your site accepts,
the user-defined menus you want, the sale discounts you offer, the permission level required to
use each of the Profit Point's special functions, and idle messages for display. Refer to the Profit
Point Reference Manual for details.
Scanner Configuration
When purchased from Gasboy, the scanner should be set up at the factory. If it is not, it is
programmed by scanning bar codes supplied with the scanner. A configuration instruction sheet,
including a list of required bar codes, is packed with the scanner. Refer to the Profit Point
Reference Manual for scanner port parameters.
Printer Configuration Submenu
The printer configuration submenu allows you to select a forms or invoice (not receipts) printer
and specify the port (LPT1 or LPT2) to which it is connected. The receipt printer, if present, is still
connected to LPT1 and prints receipts regardless of this configuration. Refer to the Profit Point
Reference Manual for details.