What you need for testing, Filling out the start-up form – Gasboy CFN Series SCII Start-Up Manual User Manual
Page 11
Introduction
03/07/03
1-3
WHAT YOU NEED FOR TESTING
To perform the testing portion of start-up, you will need:
•
a digital voltmeter
•
a 1/4 inch flat blade screwdriver
•
a Phillips head #1 screwdriver
•
a Phillips head #2 screwdriver
•
a plastic 1/8 inch or smaller flat blade screwdriver
•
socket handle 1/4" drive (NOTE:
A socket bit #2, P/N C04479, for the island card reader is
shipped with every CFN Site Controller II System. This socket should be left with the end
user.)
•
a tape measure
•
Diskettes (2-4 blank double-sided, double-density for the SC II; 2 blank high density for the
Profit Point) or a PCMCIA 2Mb SRAM card for the Islander.
•
An in-house Dsite chip is recomended as part of your start-up kit, although it is not required
for most startups.
We recommend that you bring all your tools and spare parts with you when doing a Start-
up.
FILLING OUT THE START-UP FORM
A sample filled-out Start-up form appears at the end of this manual. You should already have
blank copies of the Start-up form; however, if you do not, you can obtain more by calling GASBOY
Customer Service. Throughout the procedures in this manual, you will find double-outlined boxes
preceded by this symbol
✍
. This writing hand symbol tells you to "fill in" the start-up
information for the entries contained in the box.
When you encounter a box, fill in all the information requested. If an option is not used or does
not apply, fill in N/A (not applicable) in that space. It may be helpful to have the terminal operator
review the Site Controller II Manager's Manual, if he or she has not already done so, while you are
starting up the system.
The Start-up form must be filled out completely and sent, with the attachments noted in Section
14 of this manual, to:
GASBOY
Customer Service Dept.
707 N. Valley Forge Rd.
P.O. Box 309
Lansdale, Pa 19446
!
IMPORTANT:
If the Startup Form is not filled out completely, it will be returned to
you for completion.
Be sure to keep a copy of this form for your own records.