Gasboy CFN Series SCII Start-Up Manual User Manual
Page 107

Customer Training
03/07/03
13-3
g. Valid types are 4 and 5. Type a number 4 or 5 and press RETURN or just press
RETURN if you are using version 1.0 or above. The Site Controller prompts you to
Verify.
h. Type Y and press RETURN. You will hear the drive activate. Wait 20 to 30 seconds.
i.
Press CTRL and C together. This deactivates the drive and completes the cleaning
process.
j.
After the disk drive access light goes off, remove the diskette and check off a box on the
usage label. After the recommended number of uses, or if the diskette becomes
discolored, discard the diskette.
❑
For systems with Fuel Point, demonstrate the following:
❑
Using the Programmer to program, read, and calibrate a VM
❑
Using the Master Authorizer to authorize a sale
❑
Using the VM to authorize a sale
❑
How to suspend and resume Fuel Point transactions
❑
For systems using the Key option, inform users of the following:
❑
To prevent key read errors, perform the following maintenance on the keys as needed.
Clean the key’s contacts using isopropyl alcohol and a toothbrush. Dip the toothbrush in
the alcohol and brush the contacts of the key until they are clean.