Change the time zone, Configure a local ntp server – Epiphan Pearl User Manual
Page 99
Pearl User Guide
Change the time zone
5. Type the desired time in the Time field. Use the format hh:mm:ss.
6. Click Apply.
Change the time zone
By default the system has the Canada/Eastern time zone set. Configuration of the time zone is necessary to
ensure synchronized time servers provide the correct time to the system.
To select another time zone:
1. Connect to the admin interface using your preferred connection mechanism. See
.
2. Login as admin.
3. Select the Date and Time link in the Configuration menu; the date and time configuration page
opens.
4. Select the new time zone from the Time Zone drop down box.
5. Click Apply.
Configure a Local NTP Server
Pearl can run a local NTP server.
To configure a local NTP server:
1. Connect to the admin interface using your preferred connection mechanism. See
.
2. Login as admin.
3. Select the Date and Time link in the Configuration menu; the date and time configuration page
opens.
4. Select the check box Enable local NTP server.
86