Epiphan Pearl - Manual (Page 58)

Pearl User Guide Configure the touch screen
Configure the touch screen
By default, Pearl's touch screen is enabled and all its features are available. Depending on your circumstances,
you may wish to disable the screen, or disable just some of its features.
This section covers the following touch screen configuration items:
l
Disable (or enable) the touch screen
l
Hide (or show) channel previews on the touch screen
l
Disable (or enable) system status on the touch screen
l
Block (or allow) configuration functions from the touch screen
l
Block (or allow) recording control from the touch screen
l
Set touch screen timeout
Disable (or enable) the touch screen
You can prevent Pearl from displaying anything on the touch screen, or you can re-instate this feature by
toggling the Enable display configuration option.
The display is always touch-sensitive. This control indicates whether or not the display is on
or off.
To disable (or enable) the touch screen display:
1. Connect to the admin interface using your preferred connection mechanism. See Connect to the admin
interface .
2. Login as admin.
3. Select the Touch Screen link in the Configuration menu; the touch screen configuration page opens.
45