Epiphan Pearl - Manual (Page 282)

Pearl User Guide Mobile / tablet operator interface
Mobile / tablet operator interface
Epiphan's tablet interface is designed for touch-screen devices. Use your tablet or mobile device to perform
confidence checks and basic operator tasks such as verifying disk space or starting and stopping recording.
This section describes procedures for the following topics:
l
Connect to the tablet interface
l
Confidence monitoring using the tablet interface
l
Verify disk space via the tablet interface
l
Control recording via the tablet interface
l
Switch to the full admin interface
Connect to the tablet interface
To get started with the tablet interface you can connect to it in one of the following ways.
The device connecting to the tablet interface must be on the same network as the Pearl or must
be physically connected to it via USB.
l
Use the browser over Ethernet
l
Use tethering on your device
l
Use the mobile version of Epiphan Connect
Use the browser over Ethernet
You can connect to the tablet interface with a browser on your admin computer, tablet, or touch-screen
device.
To connect to the tablet interface:
1. Connect to the admin interface using your preferred connection mechanism. See Connect to the admin
interface .
2. Login as admin or operator.
3. Modify the URL in the browser to have /m after the existing text and press Enter; the tablet interface
opens. (If you forget the /m, the system will direct you to the mobile or standard interface, depending
on information sent by your device's browser).
269