Epiphan Pearl - Manual (Page 278)

Pearl User Guide Configure the local FTP server
The ftp password is the regular access password for the selected user. See User
administration for details on user names and passwords.
c. Click Apply.
5. To allow the FTP user to delete files:
a. Select the Enable FTP DELETE command check box.
b. Click Apply.
Any currently logged in ftp users must log out and back in again to have access to
the command.
6. To disable the FTP server:
a. De-select the Enable FTP access check box.
b. Click Apply.
7. To disable file deletion by FTP:
a. De-select the Enable FTP DELETE command check box.
b. Click Apply.
Any currently logged in users will continue to have access to the delete command
until they log out and log in again.
The following table summarizes the options for configuring the local FTP server.
Table 34 FTP Server Configuration Options
Name Description / Options
Enable FTP access
The check box controls whether or not the system acts as an FTP server. By default this
is disabled.
FTP user name
Select one of the system users: admin, operator, or viewer. The ftp password will be the
access password for the selected user. By default the admin user is selected.
Enable FTP
DELETE com-
mand
Controls whether or not FTP users can delete files. By default file deletion is not per-
mitted.
265