Epiphan Pearl User Manual
Page 297
Pearl User Guide
Install firmware
7. The touch screen, if enabled, also displays a notice that the firmware update is in progress.
Do not interrupt power to the system during the firmware upgrade.
8. When the firmware update is complete, the message lets you know it is going to reboot.
9. Wait for the system to restart. Depending on the upgrade, a disk rebuild may be required, causing the
restart process to take much longer than usual.
10. Connect to the admin interface using your preferred connection mechanism. See
.
11. Login as admin.
12. Select the Firmware Upgrade link in the Configuration menu; the firmware upgrade page opens.
13. Verify that the firmware version is the expected new version.
Although unexpected, it is possible the firmware update fails. In this case, the touch screen reports the failure.
Please collect system information such as device serial number and, if known, the previous firmware version
along with the new firmware version and contact [email protected]
284