Epiphan Pearl - Manual (Page 96)

Pearl User Guide Verify date and time settings
Verify date and time settings
The current date, time, time zone, and synchronized time protocol settings are shown when the Date and
Time configuration page is loaded in the Pearl web interface.
To view settings on the date and time configuration page:
1. Connect to the admin interface using your preferred connection mechanism. See Connect to the admin
interface .
2. Login as admin.
3. Select the Date and Time link in the Configuration menu; the date and time configuration page opens
and the following information is displayed:
The date and time configuration page also indicates whether the system is currently using synchronized or
manually set time, and whether or not a local network time protocol (ntp) server is running.
The following table describes the date and time configuration fields.
Table 17 Date and Time Options
Label Description/Options
Time Zone The currently selected time zone.
Enable time syn-
chronization Whether or not a time synchronization protocol is being used for setting time. (If not
selected, time is set manually.)
Protocol The time synchronization protocol.
Service IP Address The time synchronization server address.
Set time manually
Whether or not time is set manually. (If time is not being set manually, a time syn-
chronization protocol is used.)
Date
The current date. (This is the current date even if the radio button Set time manually is
not selected.)
83