Epiphan Pearl User Manual

Page 71

Pearl User Guide

Configure a static IP address

5. Touch Static IP Address to configure a static IP address; the static IP configuration page appears.

6. Touch an IP Address section (e.g. 192) and type a new value using the keypad.

7. Repeat for all fields in the IP Address and Network Mask.

Only IPv4 addresses are supported.

8. Enter the Default Gateway address. If you do not have a default gateway for your network, enter the

same static IP address as in the previous step.

The default gateway cannot be left blank. If no default gateway is specified, unexpected
behavior occurs.

9. Enter the DNS Server address. If you do not have a DNS server, enter the new static IP address of the

system.

10. Touch Apply to apply the changes.

To configure a static IP address via the web interface:

1. Connect to the admin interface using your preferred connection mechanism. See

2. Login as admin.

3. Select the Network link in the Configuration menu; the network configuration page opens.