Epiphan Pearl - Manual (Page 85)

Pearl User Guide Apply a configuration preset using the touch screen
5. If necessary touch the arrows at the bottom of the page to navigate to the desired preset.
6. Touch the name of the preset you wish to apply.
7. A confirmation message is displayed.
If the configuration preset includes the network or system configuration groups, a
reboot is necessary.
8. Click OK to apply the preset; the configuration preset is applied.
9. The system reboots, if required.
To apply a configuration preset that contains only the network configuration group you may use this process:
1. If necessary, tap the screen once to turn it on or to turn on the screen overlay.
2. Touch the gear icon at the bottom right of the screen; the settings page appears.
72