Epiphan Pearl - Manual (Page 213)

Pearl User Guide Stream content using multicast
3. From the web interface, click a Channel; the menu expands.
4. Click Streaming; the channel's Streaming page opens.
5. Click the Publish drop-down menu.
6. Choose using MPEG-TS UDP push.
7. Enter the destination multicast IP address where the broadcast can be viewed.
A IPv4 multicast address range is an address between 224.0.0.0 to 239.255.255.255.
Contact your System Administrator for the specific address to use.
8. Enter the destination port number through which the media will stream.
9. Perform one of the following:
a. If you do not want to advertise your stream to a media player over a local network, go to the last
step of this procedure; or
b. To advertise your stream to a media player over a local network, follow the steps below.
10. Enable the SAP announcement checkbox to advertise your stream over a local network. When the
checkbox is enabled and a multicast IP address is configured, your stream is displayed in the playlist of
local media players.
200