Configure date and time, Verify date and time via the touch screen – Epiphan Pearl User Manual
Page 95
Pearl User Guide
Configure date and time
Configure date and time
Pearl uses the current date and time in naming recorded files and when synchronizing and timestamping
inputs from multiple sources (i.e. when synchronizing an audio and a video source). The admin interface lets
you specify date and time settings to ensure they are correctly configured for your time zone and your
network.
This section covers the following date and time-related topics:
l
Verify date and time via the touch screen
l
l
l
Configure synchronized time (NTP, PTP v1, and RDATE)
l
l
Configure the date and time manually
Verify date and time via the touch screen
Pearl's touch screen interface, if enabled, can quickly and easily show you the system's date and time settings.
To show system information (including date and time) on the touch screen:
1. If the system information button (i) does not appear on the screen, tap the screen once to turn on the
control buttons.
2. If the system information button (i) is still not visible, it is disabled in the system's Touch screen
3. Touch the system information button (i) on the screen; the system information screen appears.
To close the system information screen:
1. Touch anywhere on the screen to return to the previous screen.
82