Restore factory default edid – Epiphan Pearl User Manual
Page 171
Pearl User Guide
Force the capture card to use a specific EDID
11. Click upload, the EDID upload begins; the screen shows a progress inidicator.
12. When the upload is complete the page changes to reflect success or failure.
Restore factory default EDID
When you have finished with a custom EDID, you can restore the capture card (in the Sources list) to the
default EDID. Currently there is no way to tell if your capture card is using a custom EDID. If you are unsure,
restoring to factory default is the best approach.
To restore the default EDID:.
1. Connect to the admin interface using your preferred connection mechanism. See
.
2. Login as admin.
3. From the web interface, scroll to the Sources section.
4. Click the capture card (source) for which you wish to restore the EDID; the source configuration page
opens.
158