Configure audio – Epiphan Pearl User Manual
Page 26
Pearl User Guide
Quick start
You'll find alternate connection streams (i.e. RTSP or MPEG-TS) for these channels by logging into the admin
interface and accessing Auto A and Auto B by the links under the Channels menu. See
Configure audio
Pearl is managed from a web interface. This interface acts as a configuration utility and system monitor.
You can access the web interface via either the device's IP address on your network, via DNS-based discovery
if you have Bonjour services installed, or via a static recovery IP address. This quickstart uses the IP address
method. You can follow other discovery methods described in the section
Connect to the admin interface
Connect to the admin interface:
1. Find the system’s IP Address:
l
from a single channel view or grid view, touch the system settings (gear) icon then touch
System Status; or
l
if your system doesn't have any channels showing, touch the screen anywhere to move to the
system settings screen then touch System Status.
2. Type the following string into the address bar of your web browser on your admin computer (where address> is the ip address of your Pearl): http:// 3. Enter the user name and password then click OK. The administrative user is ‘admin’. Initially no password is set. To set a password follow the procedure outlined in 13
For example: http://192.168.0.183/admin