Afu using scp – Epiphan Pearl User Manual
Page 265
Pearl User Guide
AFU using SCP
c. Click Upload to upload the file.
2. Use the Test your key field to test your uploaded key against the secure server, if desired.
8. Click Apply; if there are any problems the system notifies you with a message: One or more parameter
values are not valid and those were not applied!
The following table describes the options applicable to configuring upload to a SFTP server.
Table 31
SFTP Automatic Upload Configuration Options
Name
Description / Options
Server
address
The IP address (or fully qualified domain name) of the SFTP server.
Server port
The port used by the target SFTP server. Standard port is 22.
Login
Username for the SFTP server.
Password
Password for the SFTP user.
Use temp file
Causes files to be named with .part extension on the server during active upload. When
the upload completes, the file is renamed to the appropriate extension (.mov, .mp4 or
.avi).
AFU using SCP
This procedure assumes you have completed the steps in
with configuration of upload via secure copy (SCP).
To configure upload via SCP:
1. Select SCP Client from the protocol drop down list in the Automatic File Upload configuration page;
the lower half of the page reflects the selection.
252