User administration, User types and privileges, Admin – Epiphan Pearl User Manual
Page 36
Pearl User Guide
User administration
4. Start a web browser on the workstation and browse to: http://192.168.255.250/admin/
5. Log in as the administrator user with the user name admin and the admin password (by default there is
no password); the web interface page opens.
6. Click the Networking link in the Configuration menu.
7. Select the radio button to use a static address and configure the system with a static IP address and
network settings relevant to the network being used. For specific details about the settings presented,
see
8. Restore the previously saved network configurations on the workstation.
User administration
Pearl has three configured users:
l
admin
l
operator
l
viewer
By default, none of these users have passwords. For security purposes you should add passwords to the
admin and operator accounts.
This section describes the following user administration topics:
l
l
l
l
l
l
l
Restrict viewers by IP address
User types and privileges
Pearl's three user accounts are admin, operator and viewer. The user account names cannot be changed and
the accounts cannot be disabled. By default, none of the accounts have passwords.
Admin
The admin account is the main operator used for all system configuration. This user has access to all options
in the web interface.
23