Epiphan Pearl - Manual (Page 184)

Pearl User Guide Stream content using HLS (HTTP Live Streaming)
5. Set the HTTP Streaming port to specify the port used to stream the HTTP broadcast. This value along
with the URL is used by viewers to access the FLV, ASF and MPEG-TS streams.
The port number must be higher than 500 for HTTP. In the case of RTSP streaming this
value is ignored.
6. Set the RTSP Streaming port to specify which port to use when you are streaming live video via RTSP.
This value along with the URL is used by viewers to access the broadcast. The default for channel one is
554.
7. Click Apply.
Stream content using HLS (HTTP Live Streaming)
Stream live over the standard HTTP port 80, making it possible to cross firewalls and proxies that are normally
accessible to other HTTP traffic .
HLS is supported with the H.264 codec and MP3 or AAC audio encoding. When streaming using
HLS there is approximately a 30 second delay.
1. Connect to the admin interface using your preferred connection mechanism. See Connect to the admin
interface .
2. Login as admin.
171