Epiphan Pearl User Manual
Page 84
Pearl User Guide
Apply a configuration preset using the touch screen
7. Click OK to apply the configuration preset; the configuration preset is applied.
8. The system reboots if needed.
Apply a configuration preset using the touch screen
You can use Pearl's touch screen to apply configuration presets.
For configuration presets that only contain the network configuration group you can use either of the two
methods described below. For all other configuration presets, use the first method.
To apply a configuration preset via the touch screen:
1. If necessary, tap the screen once to turn it on or to turn on the screen overlay.
2. If the system settings button (gear) is still not visible and an i icon is visible instead, configuration by
touch screen is disabled in the system's settings. See
3. Touch the gear icon at the bottom right of the screen; the settings page appears.
4. Touch Configuration Presets; an alphabetically sorted list of saved presets is presented (Factory
default is always listed first). Each preset shows the included preset configuration groups via a list of
icons to the right of the preset name.
71