Epiphan Pearl - Manual (Page 240)

Pearl User Guide Restart recording
Label Description / Options
Share via UPnP
Select this if you want this channel or recorder to be avialable via UPnP. If global UPnP
is not enabled when you select this checkbox, a link appears to let you to fix it. Click the
link and click Apply to make the global UPnP change save your recording configuration
changes.
Restart recording
Recording files are automatically saved and new ones opened for writing when they reach the configured time
or size limit, when the channel or recorder name is changed, or when changes are made to the stream.
You cannot download files from the system while they are being recorded, so from time to time you may need
to close the current recording and restart a new one to facilitate file downloads. The system supports this
through the recording reset option, which closes the current recording file and opens a new one without
missing any frames.
To close the current recording and start a new file:
1. Connect to the admin interface using your preferred connection mechanism. See Connect to the admin
interface .
2. Login as admin.
3. For a channel recording:
a. Click the desired channel; the channel menu expands.
b. Click the Recording link for the channel; the Recording page opens.
4. For a recorder:
a. Click the desired recorder link from the Recorders section; the recorder configuration page
opens.
5. Click the Reset button next to the stop button; the current file is stopped and a new one begins.
6. Refresh the page to see the new recorded files list.
227