Epiphan Pearl - Manual (Page 63)

Pearl User Guide Configure the touch screen
4. Uncheck Allow start/stop recording to disable recording control from the touch screen (or check the
box to enable recording control).
5. Click Apply.
6. Enter a value in the Timeout field. The values is in seconds. Use 0 to keep the screen on whenever the
system is on.
7. Click Apply.
Set touch screen timeout
Initially, the touch screen is always on for easy monitoring. However, if you'd like, you can modify its
configuration to cause it to shut off after a given amount of time. To re-enable it after timeout, simply touch
anywhere on the screen.
To set a timeout for the touch screen:
50