Connect via the epiphan discovery utility – Epiphan Pearl User Manual
Page 34
Pearl User Guide
Connect to the admin interface
4. Optionally, navigate to the Network link under the Configuration heading and note the IP address of
the system.
Connect via the Epiphan discovery utility
Epiphan provides a utility for discovering Epiphan systems on your network. The Epiphan network discovery
utility is a 32-bit Windows executable that works on most 32-bit and 64-bit Windows operating systems.
Download and install the utility via this link:
To access the Pearl's web interface via the Epiphan discovery utility:
1. Launch the discovery utility.
2. Click Search to find all the Epiphan systems on the network; a list similar to the following appears.
3. If more than one system appears, select the one you wish to configure by matching the serial number
listed with the serial number marked on the back of the system.
4. Optionally, note the IP Address shown in the stream properties. Use this for quicker access to the
system on future configuration sessions.
5. Click the Web config button; your browser will open and point to the web interface page.
http://
21