Configure network settings – Epiphan Pearl User Manual
Page 66
Pearl User Guide
Configure network settings
Configure network settings
By default Pearl uses DHCP to obtain an IP Address via an Ethernet-based network. If you want to change the
network settings, or if you’re having network-related issues, this section covers the network-related topics.
l
Verify IP Address and MAC address via the touch screen
l
Verify IP Address and MAC address via the web interface
l
l
l
l
Verify IP Address and MAC address via the touch screen
Pearl's touch screen interface, if enabled, can quickly and easily show you the system's IP Address and
MAC address.
To show system information on the touch screen:
1. If the system settings button (gears) does not appear on the screen, tap the screen once to turn on the
control buttons (from the "no channels" or "preview disabled" screen, this will go directly to the system
settings screen).
2. If the system settings button (gears) is still not visible and an i icon is visible instead, configuration by
touch screen is disabled in the system's settings. See
3. Touch the system settings button (gears) on the screen; the system settings screen appears.
4. Touch System Status to see the system information page.
53