Preview a source, Configure a source – Epiphan Pearl User Manual
Page 159
Pearl User Guide
Preview a source
Preview a source
You can preview the images captured from your sources in the web admin interface. No extra configuration is
needed.
To preview the captured stream/images:
1. Connect to the admin interface using your preferred connection mechanism. See
.
2. Login as admin.
3. Ensure a source is connected to the input port, see Table
4. From the web interface, click the source name from the Sources menu; the source configuration page
opens.
5. Scroll to the bottom of the source configuration page to see the preview.
Configure a source
Generally the captured stream doesn't require any additional configuration, but if needed, you can log into
the web interface to make configuration changes.
To configure a source:
146