Pilz PNOZ m1p base unit - Manual (Page 69)

5.3 Example configurations
5 Loop formation (LOOP)
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
5-4
5.3.2 Application using two loops
Application using two loops 5- _Dummy-Vorlage
In the example configuration, the status of the "LOOP 0" output is made
available one cycle later at the "LOOP 0" input. Logically, the "Output 2"
output switches one cycle later than the "Output1" output.
One more cycle later, the status of output "LOOP1" is made available at
the "LOOP1" input.
This means that the "Output 3" output switches 2 cycles later than the
"Output1" output.