Pilz PNOZ m1p base unit - Manual (Page 35)

3.6 Operation
3 Safety Mat/Safe Edge
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
3-8
3.6 Operation 3600 Operation 3- _Dummy-Vorlage
The safety system can only be started if the pressure-sensitive protec-
tive device has not been activated. The unit detects the operating mode
set on start-up.
3.6.1 Diagnostic word
Diagnostic word 3- Schaltmatte-Diagnosewort
Messages can be queried in the PNOZmulti Configurator in bit mode
and linked further within the program.
 Bit 0: Pressure-sensitive protective device clear, enable issued
 Bit 2: Pressure-sensitive protective device activated
 Bit 3: Waiting for reset
 Bit 4: Waiting for start-up test
 Bit 6: Open circuit detected, signal error