Pilz PNOZ m1p base unit User Manual
Pnozmulti special applications
This manual is related to the following products:
Table of contents
Document Outline
- Operating Manual PNOZmulti Special Applications
- Preface
- 1 Introduction
- 2 Muting
- 3 Safety Mat/Safe Edge
- 4
Burners
- Introduction
- Safety
- Configuration in the PNOZmulti Configurator
- 4.3.1 Functions
- 4.3.2 Monitoring functions/settings for the burner cycle
- 4.3.2.1 Combustion air pressure monitoring, activating the combustion air blower, compound controller monitoring
- 4.3.2.2 Ignition
- 4.3.2.3 Flame monitoring
- 4.3.2.4 Compound controller
- 4.3.2.5 Tightness control
- 4.3.2.6 High temperature
- 4.3.2.7 Plant-dependent monitoring functions
- 4.3.2.8 Shutdown types
- 4.3.2.9 Step times
- Burner cycle
- 4.4.1 Steps
- 4.4.2 Errors during the burner cycle
- 4.4.3 Master burner with direct ignition
- 4.4.4 Master burner with separate flame monitoring
- 4.4.5 Master burner with joint flame monitoring
- 4.4.6 Slave burner with direct ignition
- 4.4.7 Slave burner with separate flame monitoring
- 4.4.8 Slave burner with joint flame monitoring
- 4.4.9 Example: Viewing the burner cycle in the PNOZmulti Configurator
- Inputs and outputs
- Configuration examples
- 5 Loop formation (LOOP)
- Contact address