Pilz PNOZ m1p base unit - Manual (Page 21)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
2-13
2.4 Operating modes
2 Muting
2.4.3 Parallel muting
Parallel muting 2-
2.4.3.1 Position of the muting sensors
Position of the muting sensors 2- Muting_Betriebsarten_paralleles Muting-Anordnung der Muting-Sensoren  Muting sensors MS1 and MS2/MS3 and MS4 must be positioned at
the same height to the left and right of the vehicle.
 The vehicle length W must be greater than distance A between MS1
and MS3/MS2 and MS4.
 The distance between the light curtain and the muting sensor must be
as short as possible.
MS3
AOPD
AOPD
MS1
MS2 MS4
W
A