Pilz PNOZ m1p base unit - Manual (Page 20)

2.4 Operating modes
2 Muting
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
2-12
2.4.2.4 Diagnostic word
Diagnostic word 2- Muting_Betriebsarten_Muting-Diagnosewort Messages can be queried in the PNOZmulti Configurator in bit mode
and linked further within the program.
 Bit 1: Light curtain, interrupted (without active muting)
 Bit 2: Waiting for reset (reset)
 Bit 3: Sensor status unfeasible, override required
 Bit 8: Muting time exceeded
 Bit 9: Feasibility error, simultaneity period exceeded on muting sen-
sors 1 and 2, only one sensor operated
Muting_Betriebsarten_Muting-Diagnosewort-bit10-para-sequ  Bit 10: Feasibility error, simultaneity period exceeded on muting sen-
sors 3 and 4, only one sensor operated
2.4.2.5 Timing diagram (example)
Timing diagram (example) 2- Muting_Betriebsarten_sequenzielles Muting-Zeitdiagramm
Vehicle length W less than distance C between MS1 and MS4
Key:
t
sync
= Simultaneity
t
MUT
= Muting time
: Set enable with reset
: Start muting via MS1/MS2
: End muting by clearing MS3
: Restart muting via MS1/MS2
1
0
1
Reset
1
0
1
0
1
0
1
0
1
0
3 2 4
MS1
MS2
Muting
Enable
AOPD
t
sync t
sync
t
MUT
MS4
MS3
1
0
1
0