ebm-papst ECI-63.XX-K4 - Manual (Page 94)

94
10 Parameter Description
This chapter describes the functions of the available parameters.
NOTe
• For a list of all parameters, see Chapter 6.2 Parameter, page 32 . The possible assignable status outputs are listed
page 110 .
Parameter memory
The parameter memory can store all the parameters listed in the following as non-volatile memory, if a STORE command is received.
Use the RESTORE command to restore the factory settings.
Parameter 0x1: Mode 1
Description: The parameter Mode 1 contains the configuration for the Input IN 1. This parameter describes how the input IN 1 is to be used and which
control task it undertakes.
Parameter 0x2: Mode 2
Description: The parameter Mode 2 contains the configuration for the Input IN 2. This parameter describes how the input IN 2 is to be used and which
control task it undertakes.
Parameter 0x3: Use the output OUT1
Description: The parameter defines which status output is output at output OUT1.
Parameter 0x4: Use of the output OUT2
Description: The parameter defines which status output is output at output OUT 2.
Parameter 0x5: Use of the output OUT3
Description: The parameter defines which status output is output at output OUT 3.