ebm-papst ECI-63.XX-K4 - Manual (Page 8)

8
1 Introduction
1.1 Foreword
This operating manual describes the possible uses, the assembly and/or installation, operation and programming of the products listed on
the front page.
All the safety instructions listed under Chapter 2 must be followed at all times during the installation and operation of the drive system;
outside of Germany the relevant laws, directives, guidelines and regulations of the respective country also apply.
Read through this operating manual carefully before starting any work on the drive system. Note and follow the following warnings in order
to avoid personal risk or product malfunctions.
This operating manual is to be thought of and handled as part of the drive system and must be handed over with the drive system if it is sold
or passed on.
The safety instructions can be copied and passed on to provide information about potential hazards and their prevention.
Depending on the version or revision status of the products, differences may exist compared to this operating manual. The user must check
this before using the manual and take into account any such differences.
1.2 Target group
This operating manual is solely directed at qualified and trained skilled personnel with knowledge of electronics and mechanics.
1.3 Notation used in this document
In this operating manual the significance of texts is denoted by different presentation forms.
Descriptive text is presented without preceding symbol.
• Text with a preceding dot (•) indicates a list which is introduced by a heading.
– Text with a preceding dash (–) is on a lower level below the list with a dot.
Underlined blue text denotes a cross-reference, which can be clicked in the PDF document. The part of the document named in the text is
then displayed.
Text in Courier font
is used to represent command sequences in software programs.