ebm-papst ECI-63.XX-K4 - Manual (Page 29)

29
5 Installation
5.11 Schematic layout: parameterisation, commissioning (startup) and automatic operation
5.11.1 Parameterisation and commissioning 5.11.2 Automatic operation
Automatic operation with stored parameters and integrated control
KICKST
AR
T
USB
micr oSD
ebmpapst Data Error microSD
USB-K4
SPS PC with “Kick-
start” software
Power supply
Control
Adapter
ECI-63.XX-K4 drive
SPS
Control
Power supply
ECI-63.XX-K4 drive
5.11.3 Connecting connector at the motor
CaUTION
Risk of damage.
When plugging in the connector to the connection on the motor
eCI-63.XX-K4, ensure that the company logo on the
connector is facing upwards towards the housing edge of the motor.
When connecting the Litz wires of the
VDC-3-49.15-K4 motor variant, ensure that the pin assignment is precisely as
specified and not incorrectly assigned, as this causes irreparable damage to the motor electronics.
VDC-3-49.15-K4 ECI-63.XX-K4