Cub Cadet 8454 - Manual (Page 18)

CHAPTER 1 8454
1-10 D569-W02 May-2003
569W110A
569W109A
569W108A
5.6 ELECTRICAL SYSTEM
1. Check electrical wiring every year for any damage
or short circuit at the connections. In addition, have
your dealer inspection the electric system regularly.
2. Do not modify or reorganize the wiring of the elec-
tric field parts.
3. When disconnecting the battery cable, disconnect
negative cable first, reinstall the positive cable first
when reinstalling.
Disconnect battery negative terminal
4. Remove the connector by pulling the plastic
section, not the wiring.
5. When connecting the connector, insert it until it
snaps.
6. Be sure not to drop sensors and relays which are
fragile.
7. When replacing a broken fuse with a new one, be
sure to use the fuse of capacity as specified.
• Be sure to turn the starting key OFF
when connecting or disconnecting the
cable.
CAUTION
5.5 ASBESTOS PARTS
Since dust out of asbestos fibrous parts is extremely
dangerous to your health, be sure to clean such parts
carefully, do not use compressed air.