CANOGA PERKINS 9175 Configuration Guide - Manual (Page 99)

CanogaOS Configuration Guide
16-9
DUT# configure terminal Enter the Configure mode.
DUT(config-router)# exit Quit the Router mode and return to the Configure mode.
DUT(config)# key chain SUN Enter the key chain management mode to add keys to the key
chain SUN.
DUT(config-keychain)# key 1 Add authentication key ID (1) to the key chain SUN.
DUT(config-keychain-key)# key-string key1 Specify a password (key1) to be used by the specified key.
DUT(config-keychain-key)# accept-lifetime
12:00:00 Mar 2 2003 14:00:00 Mar 7 2003 Specify the time period during which authentication key string
key1 can be received. In this case, key string key1 can be received
from noon of March 2 to 2 pm March 7, 2003.
DUT(config-keychain-key)# send-lifetime
12:00:00 Mar 2 2003 12:00:00 Mar 7 2003 Specify the time period during which authentication key string
key1 can be send. In this case, key string key1 can be sent from
noon of March 2 to noon of March 7, 2003.
DUT(config-keychain-key)# exit Exit the keychain-key mode and return to keychain mode.
DUT(config-keychain)# key 2 Add another authentication key (2) to the key chain SUN.
DUT(config-keychain-key)# key-string Earth Specify a password (Earth) to be used by the specified key.
DUT(config-keychain-key)# accept-lifetime
12:00:00 Mar 7 2003 14:00:00 Mar 12 2003 Specify the time period during which authentication key string
Earth can be received. In this case, key string Earth can be
received from noon of March 7 to 2 pm March 12, 2003.
DUT(config-keychain-key)# send-lifetime
12:00:00 Mar 7 2003 12:00:00 Mar 12 2003 Specify the time period during which authentication key string
Earth can be send. In this case, key string Earth can be sent from
noon of March 7 to noon of March 12, 2003.
DUT(config-keychain-key)# end Enter Privileged Exec mode.
DUT# configure terminal Enter the Configure mode.
DUT(config)# interface eth-0-1 Specify the interface (eth-0-1) for authentication.
DUT(config-if)# ip rip authentication key
chain SUN Enable RIPv2 authentication on eth-0-1 interface and specify the
key chain SUN to be used for authentication.
DUT(config-if)# ip rip authentication mode
md5 Specify the authentication mode to be MD5.
Validation Commands
show running-config, show ip rip, show ip protocols rip, show ip rip interface