beautypg.com

4 configuring packets per second storm control – CANOGA PERKINS 9175 Configuration Guide User Manual

Page 236

background image

CanogaOS Configuration Guide

35-2

35.4 Configuring Packets per second Storm control

35.4.1 Topology

Figure 35-2: PPS Storm Control

35.4.2 Configurations

Bridge 1

DUT#configure terminal

Enter the Configure mode.

DUT(config)#interface eth-0-1

Enter the interface mode.

DUT(config-if)#storm-control unicast pps 1000

Set unicast pps to 10 packets per seconds.

DUT(config-if)#storm-control multicast pps 100

Set multicast pps to 100 packets per seconds.

DUT(config-if)#storm-control broadcast pps 1000

Set broadcast pps to 1000 packets per seconds.

DUT(config)#end

Exit to exec mode.

DUT#show storm-control eth-0-1

Display storm control information.

35.4.3 Validation

Commands

Bridge 1

DUT#show storm-control eth-0-1
Port ucastMode ucastLevel bcastMode bcastLevel mcastMode mcastLevel
eth-0-1 PPS 10 PPS 1000 PPS 100