Print multiple trends manually or automatically, Delete all patient trends – Welch Allyn 246 Propaq CS Vital Signs Monitor v.3.7X - User Manual User Manual
Page 71
Directions for Use
Printing & trends
67
Print multiple trends manually or automatically
1.
Press SETUP, MORE, PRINTER from the Main Menu to display the Printer Setup
Page:
2.
Press NEXT as needed to scroll down to the parameters listed below AUTO TREND
(NIBP, RESP, etc.).
3.
Press NEXT and CHANGE to set desired trends to ON.
4.
To manually print all selected trends, press PRINT TREND on this page or press
PRINT TRENDS on the bottom front panel of the monitor.
You can print all selected trends at any time by pressing the PRINT TRENDS button.
5.
To program the monitor to automatically print selected trends every four hours, press
NEXT as needed to highlight AUTO TREND, then press CHANGE to select the hours
for printing.
For example, if you select 01 05 09 13 17 21 at 4:27, the printer will automatically print
selected trends first at 5:00, then 9:00, etc.
Delete all patient trends
To delete all trends recorded for a patient, turn off the monitor.
PRINTER
BR
TEMP
100.4
98.6
1.8
97
P
2
( 15)
mmHg
(M)
25
9
S
D
NIBP
( 85)
mmHg
(M)
%
F
122
58
MCO
2
S
p
O
2
mmHg
38
Br/m
S
D
NEXT
T1
T2
ΔT
PREVIOUS
MENU
SETUP PAGE
AUTO TREND : 01 05 09 13 17 21
CONTINUOUS
AUTO PRINT
ALARM PRINT
NIBP TICKET
APNEA TICKET
OXYCRG ON ALARM
NIBP :
ON
RESP : OFF
P1
: ON
: 25.0 mm/s
: OFF
: OFF
: OFF
: ON
: OFF
P
2
: OFF
CHANGE
TREND
TEMP : OFF
12
Press to print all
selected trends.
Press to scroll to
the next selection.
Press to change the
displayed value.
Specifies what time the trends
automatically print. Trends are
printed every 4 hours
beginning at either
01, 02, 03, or 04 hours.
(OFF=no printing.)
Select ON to include in trend
printing.