Welch Allyn 246 Propaq CS Vital Signs Monitor v.3.7X - User Manual - Manual (Page 103)

Directions for Use Reference 99
NIBP specifications
Characteristic Specification
Method Oscillometric
Control Automatic and manual measurement control
Auto Intervals 1, 2, 3, 5, 10, 15, 30, and 60 minutes
Turbocuf Maximum measurements allowable in a 5-minute period
Displayed Pressures Systolic, Diastolic, and Mean plus on-screen manometer
Systolic Range Adult: 30 to 260 mmHg
Ped: 30 to 160 mmHg
Neonate: 25 to 120 mmHg
Diastolic Range Adult: 20 to 235 mmHg
Ped: 15 to 130 mmHg
Neonate: 10 to 105 mmHg
Mean Range Adult: 20 to 255 mmHg
Ped: 15 to 140 mmHg
Neonate: 10 to 110 mmHg
Static Manometer Accuracy ±3 mmHg
Minimum Inflation Pressure Adult: 100 mmHg
Ped: 80 mmHg
Neonate: 50 mmHg
Maximum Allowable Pressure Adult: 270 mmHg
Ped: 170 mmHg
Neonate: 132 mmHg
Default Inflation Pressure Adult: 160 mmHg
Ped: 120 mmHg
Neonate: 90 mmHg
Normal Overpressure Limit (results in up to
2 retries) Adult: 280 mmHg
Ped: 200 mmHg
Neonate: 141 mmHg
Single Fault Overpressure Limit Adult: 308 mmHg
Ped: 220 mmHg
Neonate: 154 mmHg
Leak Rate After a 1 minute settling period, leak rate is <4 mmHg over a 3-minute
period at 270 mmHg.
Pulse Rate Range 30 to 220 beats per minute
NIBP Alarm Limit Ranges Neonate:
Systolic 25 to 120 mmHg
Diastolic 10 to 105 mmHg
Mean 10 to 110 mmHg
Pediatric:
Systolic 30 to 160 mmHg
Diastolic 15 to 130 mmHg
Mean 15 to 140 mmHg
Adult:
Systolic 30 to 260 mmHg
Diastolic 20 to 235 mmHg
Mean 20 to 255 mmHg
Maximum Determination Time (with retries) Adult: 4.5 minutes
Ped: 4 minutes
Neonate: 3 minutes
Maximum Determination Time (no retries) Adult: 3 minutes
Ped: 2 minutes
Neonate: 1.5 minutes
Typical Determination Time without Artifact 30 to 45 seconds
Minimum Time between automatic
measurements
30 seconds (Auto Mode)
2 seconds (Turbo Mode)
Artifact Filtering Smartcuf software algorithm (may be be enabled or disabled; requires ECG
monitoring). NIBP measurements can still be taken if Smartcuf is disabled.
Electrosurgery Interference Suppression Included in all models.
NIBP Performance Per EN 1060-1, EN 1060-3 and ANSI/AAMI SP10-1992
NIBP Safety Per EN 60601-2-30