Welch Allyn 246 Propaq CS Vital Signs Monitor v.3.7X - User Manual - Manual (Page 14)

10 General information Welch Allyn Propaq CS Vital Signs Monitor
Display
You can select up to four waveforms to be shown on the Propaq CS monitor. When only
one waveform is selected, a trend window automatically appears beneath the waveform.
While changing monitor settings, a status window may appear below the waveform:
NET
OFF
HR
MON
V
MON
17:05:10 PRINT FAULT
II
BR
P 1
( 96)
BPM
mmHg
(M)
TEMP 130
100
70
30
15
0
P
2
P
1
100.4
98.6
1.8
97
121
79
S
D
P 2
( 15) mmHg
(M)
25
9
S
D
NIBP
( 85) mmHg
(M)
%
F
122
58
MCO 2
S p O 2
mmHg
38
Br/m
12
S
D
STATSCALE ALARMS ACUITY TRENDS MORE
ADULT
ON NETWORK
T1
T2
ΔT
mV
cm
1
mV
cm
1
112
ALLEN KIM
Bells indicate alarm limit
status
NET OFF
to disconnect
monitor from
Acuity network.
Heart Rate in beats per
minute.
Heart Rate Source: HR
indicates ECG;
PR indicates blood
pressure or SpO
2
.
All numeric values are
continuously displayed
and updated.
If the monitor detects a
vital sign outside the
measurable range, it
displays
- - - (below the range) or
+ + + (above the range).
When selected,
trends are
displayed here.
Patient mode Status messages can appear here. Time of day
Patient name
entered at Acuity
Central Station.
STATSCALE
automatically
adjusts all
waveform scales
for optimum
viewing.
12
ADULT
ECG/RESP
MON
17:05:10 PRINT FAULT
II
BR
P 1
( 96) mmHg
(M)
TEMP 100.4
98.6
1.8
97
121
79
S
D
P 2
( 15) mmHg
(M)
25
9
S
D
NIBP
( 85) mmHg
(M)
%
F
122
58
MCO 2
S p O 2
mmHg
38
Br/m
S
D
NEXT CHANGE PREVIOUS
MENU
NET
OFF ON NETWORK
T1
T2
ΔT
mV
cm
1
112 HR
BPM
: ON
: MONITOR (0.5-40Hz)
: Ld2 (RA-LL)
: OFF HR/PR TONE
PACER DISPLAY
ECG BANDWIDTH
RESP LEAD
RESP MONITORING : ON
ALLEN KIM
Status
window
Oxygen saturation
is a percentage
value.
ETCO
2
concentration
Breath Rate from
CO
2
Systolic, diastolic,
and mean
pressures are
uniquely labeled
and displayed.
ECG1
waveform is
always
displayed if
active.