Welch Allyn 246 Propaq CS Vital Signs Monitor v.3.7X - User Manual - Manual (Page 126)

122 Index Welch Allyn Propaq CS Vital Signs Monitor
Date format setting , 92
Decimal character setting , 92
Default inflation pressure (NIBP) , 32
Default settings , 93
DEFIB FAULT message , 63
Defibrillator Synchronization
Connector , 7
Equipment alert messages , 63
Specifications , 97
Delete all patient trends , 67
Disconnect monitor from Acuity , 76
Disinfection instructions , 86
Display
Artifact interference , 23
CO2 , 46
ECG/RESP , 24
Equipment alert messages , 56
General description , 10
IBP waveforms , 29
NIBP , 34
Pacemaker indicators , 27
Specifications , 107
SpO2 , 38 , 39
Sweep speed selection , 16
Sweep speed selection, CO2 and RESP , 47
Temperature , 36
Trends , 66
Waveform selection , 16
E
ECG
Display , 24
Electrode selection and placement , 23
Electrosurgery and interference , 24
Equipment alert messages , 56
Filter to reduce interference , 26
Lead selection , 25
Pacemaker display indicators , 27
Specifications , 95
Waveform size adjustment , 25
ECG/RESP menu 1 , 24
ECG/RESP menu 2 , 25
ECG filter setting , 92
ECG LEAD , 25
ECG SIZE , 25
Electrocautery and IBP monitoring , 28
Electrodes and ECG (see ECG)
Electrosurgery and ECG interference
, 24
Environmental specifications , 109
Equipment Alert
Acuity Network Message , 62
Defibrillator Messages , 63
ECG Messages , 56
IBP Messages , 57
Low battery messages , 63
Mainstream CO2 Messages , 59
Messages , 56
NIBP Messages , 57
Printer Messages , 63
PROGRAM FAULT Message , 62
RESP Messages , 56
Sidestream CO2 Messages , 60
SpO2 Messages , 59
Temperature Messages , 59
ERR message for NIBP , 66
ETCO2 (End-Tidal CO2) , 42 , 44
Extended storage precautions , 88
F
Factory default settings , 93
Factory patient modes
Setup , 19
Fahrenheit temperature units , 36
False alarms with SpO2 , 38 , 40
Filter to reduce ECG interference , 26 , 92
FlexNet , 72
Access points , 72
Automatic reconnection , 73
Operation out of range , 72
Flowrate, Sidestream CO2 , 48
Format adjustment for IBP numerics , 31
Fuse replacement
AC power adapter , 83
Monitor input power , 84
G
Gas compensation, CO2 , 47
H
Heart Tone volume , 16
Hewlett-Packard patient connectors , 8
High frequency ventilation and RESP , 22
HP (Hewlett-Packard) patient connectors , 8
HR/PR Alarm Limits, on/off enable , 92
HR/PR source , 16
HR/PR tone volume adjustment , 16
I
IBP
Adjust waveform scale , 30
Automatic display adjustment , 30
Change waveform display labels , 30
Display , 29
Electrocautery warning , 28