Dell Compellent Series 30 - Manual (Page 178)

170 Storage Center 5.5 System Manager User Guide
Controllers
Figure 140. iSCSI IO Card Properties
3 The window displays:
• Type: iSCSI
• Description
• Status: Up or Down
• WWN
• User Alias
• IP Address, Subnet Mask, Gateway IP Address
• Maximum Transmission Unit: Standard or Jumbo Frames (Refer to Enabling
Jumbo Frames on page 171 .)
• Enable or clear VLAN taggings. (Refer to Enabling VLAN Tagging on page 171 .)

To set a user alias
To enter a user alias, in the IO Card General Properties window, enter a user alias or click
Reset User Alias.

To add an iSCSI card
To add an IO card to your system, in the IO Card General Properties window, enter an IP
address, Subnet mask, or Gateway IP address.