Acronis Access - Installation Guide - Manual (Page 98)

98 Copyright © Acronis International GmbH, 2002-2014

Timestamp – shows the date and time of the event.

Type – shows the level of severity of the event.

User – shows the user account responsible for the event.

Message – shows information on what happened.
If you have enabled Audit logging on a Gateway Server, you will also see the activity of your mobile
clients. If you have allowed Desktop and Web clients to access mobile Data Sources, they will also be
reflected in the log.

Device Name – name of the connected device.

Device IP – shows the IP address of the connected device.

Gateway Server – shows the name of the Gateway Server to which the device is connected.

Gateway Server Path – shows the path to the data source on that Gateway Server.
To enable Audit Logging for a specific gateway server:
1. Open the web interface.
2. Log in as an administrator.
3. Open the Mobile Access tab.
4. Open the Gateway Servers tab.
5. Find the server for which you want to enable Audit Logging.
6. Press the Details button.
7. In the Logging section check Audit Logging.
8. Press the Save button.
To enable Debug Logging for a specific gateway server:
Note: The default location for the debug logs is: C:\Program Files (x86)\Acronis\Access\Gateway
Server\Logs\AcronisAccessGateway
1. Open the web interface.
2. Log in as an administrator.
3. Open the Mobile Access tab.
4. Open the Gateway Servers tab.
5. Find the server for which you want to enable Debug Logging.
6. Press the Details button.
7. In the Logging section check Debug Logging.
8. Press the Save button.
9.3.2 Settings
Acronis Access can automatically purge old logs and export them to files based on certain policies.