Acronis Access - Installation Guide - Manual (Page 17)

17 Copyright © Acronis International GmbH, 2002-2014
Note: You can skip this section, and configure LDAP later.
1. Mark Enable LDAP.
2. Enter the DNS name or IP address of your LDAP server.
3. Enter the port of your LDAP server.
4. If you use a certificate for connections with your LDAP server, mark Use Secure LDAP
Connection.
5. Enter your LDAP credentials, with the domain. (e.g. acronis\hristo).
6. Enter your LDAP search base.
7. Enter the desired domain(s) for LDAP authentication. (i.e.to enable LDAP authentication for an
account with the email [email protected], you would enter glilabs.com)
8. Press Save.