Rockwell Automation Flex/WebPak 3000 DC Drive ControlNet, Network Communication Board, 915FK2101 User Manual

Page 43

Configuring ControlLogix Applications

5-9

Step 16. Select Communications / Download to download the configuration to the

controller (figure 5.16). RSLogix automatically enters on-line mode when
complete.

Step 17. An Attention symbol

is located next to the Node 2 (FP3000) icon in figure

5.17, which indicates the ControlNet scanner needs to be configured.

Step 18. Start RSNetWorx and perform the following:

a. Click the On-line icon

and browse the network.

b. Select Edits Enabled and view the messages in the Message View for completion

(figure 5.18). The

icon should disappear from the nodes in the Graphical View.

c. Select File / Save and save the project.

d. Close RSNetworx.

This schedules the I/O that was configured in the RSLogix 5000.

Figure 5.16 – Download to the Controller Dialog Box

Figure 5.17 – RSLogix: Attention Symbol

Cnet_bridge:0 (FlexPak 3000 2.1)