Rockwell Automation Flex/WebPak 3000 DC Drive ControlNet, Network Communication Board, 915FK2101 User Manual

Page 36

5-2

ControlNet Network Communication Option Board For Use With FlexPak 3000 and WebPak 3000 DC Drives

Step 1. Right-click on the I/O Configuration folder and select New Module (figure

5.2).

Step 2. Select the ControlNet module used by the controller. In this example (figure

5.3), a 1756-CNB Series B ControlNet Bridge is selected.Click OK.

Figure 5.2 – RSLogix 5000: New Module Selection

Figure 5.3 – Select Module Type: 1756-CNB/B Selection