Rockwell Automation 284D On-Machine ArmorStart Accelerator Toolkit - Manual (Page 96)

96 Publication IASIMP-QS015C-EN-P
Chapter 5 Faceplate Logix Integration
2. Set the tag Inp_NumRowsVis for your ArmorStart Add-On Instruction to the number of rows that you
will use on the Equipment Status Faceplate.
a. Under the Add-On Instructions folder in the system tree,
double-click the ArmorStart Add-On Instruction that you will
use for the device in row 1.
b. Under the Parameters tab, find the Inp_NumRowsVis tag and
check the Vis box to make the tag visible on the AOI.
This tag only needs to be set for the Add-On Instruction used
in row 1 of the faceplate.
The default number of rows, ‘Inp_NumRowsVis’ is set to 9. You can change the number of rows
displayed here by changing the default, or edit the field directly on the Add-On Instruction when
creating your ladder rungs.
Integrate ArmorStart AOI into Your Application Program Routines
Follow these steps to add ArmorStart Add-On Instruction into your application program routines for each
of your ArmorStart devices that you have configured.
1. Open the intended program routine.
2. Create a rung.
3. Click the Add-On Instruction tab.