Run the project on a terminal, Run the project on a, Terminal – Rockwell Automation 284D On-Machine ArmorStart Accelerator Toolkit User Manual
Page 142
142
Publication IASIMP-QS015C-EN-P - August 2011
Chapter 6
FactoryTalk View Integration
Run the Project on a Terminal
Follow these steps to run your project on the PanelView Plus terminal.
1. Apply power to the PanelView Plus terminal.
2. Connect your motion system communication network cable to your PanelView Plus terminal and
personal computer.
The FactoryTalk View ME
Station window opens.
3. Press Load Application [F1].
The Load Application window
opens.
4. Scroll through the list of application files by
using the up/down arrows and select the
.mer file you intend to run.
ArmorStart.mer is used in this example.
5. Press Load [F2].
The Replace Communications window
appears.
6. Press Yes [F7].
If you press No [F8], the communication
settings from the project run previously will
be used instead.